Pet Food Packaging Bags: How to Select Materials for Dry Food and Treats
A small pouch of freeze-dried dog treats and a 5kg bag of dry kibble have almost nothing in common when it comes to packaging. Different product, different weight, different barrier needs, different filling method — and yet we see brands try to use the same bag structure for both.
At Guoshengli Packaging, we manufacture custom pet Food Packaging across stand-up pouches, flat-bottom bags, side-gusset bags, quad-seal bags, and printed Rollstock films. The first thing we ask isn't "what size do you need?" — it's "what are you packing?"
That question drives everything else: material structure, pouch style, barrier requirements, and cost.

Different Products, Different Packaging Needs
Dry Dog Food and Cat Food
Dry kibble needs moisture protection, oxygen barrier, and enough bag strength to survive filling, shipping, and shelf handling. Larger filling weights — 2kg, 5kg, 10kg+ — put real stress on seals and bottom construction. A small stand-up pouch that works for 200g of cat treats won't cut it for a 5kg kibble bag.
Freeze-Dried Treats
Freeze-dried products are lightweight and extremely sensitive to moisture. They often need aluminum foil or high-barrier metallized film, plus a resealable zipper since consumers open and close these bags repeatedly. Oxygen protection matters too — freeze-dried treats degrade fast if exposed to air.
Jerky and Soft Treats
Jerky and soft chews have product-specific moisture and barrier needs. Some formulations need moisture retention (to keep them chewy), while others need protection against moisture ingress. There's no universal answer — we need to know the product's water activity and target shelf life before recommending a laminate.
Pet Biscuits and Crunchy Treats
Biscuits need protection against moisture absorption (nobody wants soggy treats) and enough bag strength to prevent breakage during shipping. For products consumers open repeatedly, a resealable zipper adds real convenience value.
| Product Type | Key Packaging Needs | Common Formats |
| Dry Dog Food | Moisture barrier, bag durability | Flat-bottom, side-gusset, quad-seal |
| Dry Cat Food | Barrier protection, convenient storage | Stand-up, flat-bottom |
| Freeze-Dried Treats | Strong moisture barrier, resealability | Stand-up with zipper |
| Jerky Treats | Product-specific barrier and closure | Stand-up, three-side-seal |
| Soft Chews | Moisture control, convenient closure | Stand-up pouch |
| Pet Biscuits | Moisture protection, crush resistance | Stand-up, flat-bottom |
Choosing the Right Bag Style
The pouch structure affects shelf appearance, filling capacity, consumer convenience, and production cost. Here's how the main formats compare.
Stand-Up Pouches
Stand-up pouches use an expandable bottom gusset to stand upright on the shelf. They're the go-to format for pet treats and smaller dry food packs (up to about 1kg).
Features we commonly add: resealable zippers, tear notches, hang holes, transparent windows, matte or glossy finishes. Stand-up pouches are versatile and relatively cost-effective — a solid all-around choice for retail pet food.
Flat-Bottom Bags
Flat-bottom pouches have a rectangular base and multiple printable panels. The structured shape works well for premium pet food brands that want maximum branding space on front, back, and sides.
Flat-bottom bags can include zippers, but the construction involves more folding and sealing steps than a stand-up pouch — that means higher per-unit cost. Worth it for premium positioning, overkill for a budget treat line.
Side-Gusset Bags
Side-gusset bags expand through folded side panels. They hold substantial volume while keeping a narrow front panel — practical for larger dry food bags where shipping efficiency matters more than premium shelf presence.
Quad-Seal Bags
Quad-seal bags use longitudinal corner seals to create a more defined rectangular shape. They're used for larger structured bags (5kg+ dry food). The four-corner construction gives a boxy, stable shape when filled — but the format adds converting complexity, and not every bag manufacturer produces them efficiently.
Printed Rollstock
For brands running automatic filling equipment, printed rollstock film feeds directly into form-fill-seal machines. You'll need to specify film width, print repeat, winding direction, roll dimensions, and sealing requirements — it's a different conversation than premade pouches.
| Bag Style | Best For | Key Trade-off |
| Stand-Up | Treats, smaller retail packs | Limited capacity for large weights |
| Flat-Bottom | Premium brands, multi-panel printing | Higher cost than stand-up |
| Side-Gusset | Larger dry food, compact shipping | Less structured shelf presence |
| Quad-Seal | Large structured bags (5kg+) | More complex construction |
| Three-Side-Seal | Small treat portions, samples | Minimal branding space |
| Rollstock | Automated form-fill-seal lines | Requires filling equipment |
The best format isn't the most complicated one — it's the one that fits your product, filling process, and budget.

Material Structures: What Actually Matters
Flexible pet food packaging combines multiple film layers — outer layer for printing, middle layers for barrier, inner layer for heat sealing. The material name tells you the layers, but it doesn't tell you everything about performance.
Common Laminates We Use
| Material Structure | Strengths | When to Consider |
| PET/PE | Printable, good general sealing | Standard treats, basic barrier needs |
| PET/VMPET/PE | Metallized barrier | Oxygen and moisture protection |
| PET/AL/PE | Aluminum foil barrier | Maximum barrier — freeze-dried, long shelf life |
| PET/NY/PE | Nylon toughness + puncture resistance | Sharp-edged kibble, heavy bags |
| MOPP/VMPET/PE | Matte finish + metallized barrier | Premium look with good barrier |
| PE/PE | Mono-material PE structure | Recyclable packaging designs |
Picking the Right Barrier
PET/VMPET/PE and PET/AL/PE are the two structures we recommend most often when oxygen and moisture protection is critical. An intact aluminum foil layer gives the strongest barrier — period. Metallized PET is a solid alternative when its properties meet your product's requirements, and it's usually more cost-effective than foil.
For larger bags with sharp kibble that can puncture film, we add nylon (PET/NY/PE). The nylon layer improves puncture resistance significantly — important for 5kg+ bags that get dropped and stacked.
Don't pick a material based on its name alone. The right structure depends on your product's water activity, fat content, target shelf life, and filling method.
Thicker Isn't Automatically Better
A thicker film doesn't guarantee better performance. Two films with the same total thickness can have completely different properties because their material structures differ. Stiffness, folding behavior, and sealability often matter more than raw thickness. Compare actual specifications — don't just pick the thickest option.

Larger Bags: Construction and Strength
A 200g treat pouch and a 5kg kibble bag live in different worlds. Larger bags need attention to:
- Material structure and thickness— heavier weight means more stress on the film
- Bottom and side seal construction— weak seals fail under load
- Gusset design— affects both capacity and structural integrity
- Filling weight vs. bag capacity— overfilling stresses seals and causes failures
Bag strength comes from the full construction — material, seal design, and pouch structure working together. Thickness alone doesn't determine whether a bag can handle 5kg of kibble.
We always recommend physical samples for larger bags. Fill them with your actual product, stack them, drop them, and check the seals before approving bulk production.
Features: Zippers, Handles, Windows
Resealable Zippers
Zippers make sense for products consumers open repeatedly — treats, smaller food packs. But a zipper is a convenience feature, not a replacement for the original protective heat seal. The first seal is what protects the product; the zipper just makes reopening practical.
Carrying Handles
For larger bags (5kg+), handles add real consumer convenience. But handle design depends on the bag structure and filling weight — not every pouch can support the same handle configuration. Review this before production.
Transparent Windows
Windows let consumers see the product — useful for treats where visual quality matters. But the window construction needs to be compatible with your barrier requirements. A window that compromises moisture protection isn't worth it.
Tear Notches and Finishes
Tear notches should be positioned to coordinate with the zipper, artwork, and sealing areas. Surface finish — matte for understated premium, glossy for vibrant color pop — is an aesthetic choice separate from functional requirements.
Recyclable Pet Food Packaging
PE-based mono-material structures (like PE/PE) are one option for brands targeting recyclability. The idea: all-PE construction is more compatible with existing flexible plastic recycling streams than multi-material laminates.
What Affects Cost
Two bags with identical dimensions can have very different prices. Here's why:
| Cost Factor | Impact |
| Pouch style | More complex construction = higher cost |
| Bag dimensions | Larger bag = more material |
| Material structure | AL foil costs more than metallized film |
| Film thickness | More raw material |
| Printing method | Digital for short runs, gravure for volume |
| Number of designs | More SKUs = more setup |
| Zippers and handles | Additional materials and processing |
| Order quantity | Higher volume = better per-unit cost |
Digital vs Gravure Printing

Digital printing works for multiple-design projects and smaller quantities — no plate costs, fast turnaround. Gravure printing uses engraved cylinders and delivers better economics for larger orders and repeat production. Our gravure equipment runs up to 11 colors.
The right method depends on quantity per design, material, artwork complexity, and whether this is a one-time run or repeat order.
MOQ
Our standard MOQ starts from 10,000 pieces. The actual minimum depends on bag style, dimensions, material, and printing method — larger bags and complex constructions may require higher quantities. For brands with multiple flavors or varieties, we confirm quantity per design when quoting.
Before You Place a Bulk Order
Check Filled Dimensions
Kibble size and shape affect how much volume a given weight occupies. Fill the sample with your actual product — not a substitute — and confirm the bag holds the target weight with enough room for sealing.
Check Construction and Appearance
Verify finished dimensions, bottom structure, gusset expansion, and printing layout. If the bag has a zipper, handle, or valve, check position and function.
Test on Your Equipment
For automatic filling, test at production speed. Premade pouches and rollstock have different requirements — rollstock projects need film width, print repeat, winding direction, and sealing specs confirmed.
Confirm Artwork
Artwork must match the approved pouch dimensions and manufacturing layout. Check: front/back graphics, side panels, zipper and tear notch positions, handles, barcodes, and sealing areas. If dimensions change after artwork approval, the design may need adjustment.
RFQ Checklist
Send us this information for the fastest, most accurate quotation:
- Product type (dry kibble / freeze-dried / jerky / soft chews)
- Filling weight per bag
- Pouch style preference
- Bag dimensions (if known)
- Material structure preference or performance requirements
- Film thickness (if specified)
- Surface finish (matte / glossy)
- Zipper, handle, or other features
- Printing method (digital / gravure / undecided)
- Number of designs/SKUs
- Quantity per design
- Filling method (premade pouch / rollstock)
- Required delivery date
- Special requirements (samples, documentation, compliance)
If you already have packaging that works, send a physical sample. For new projects, start with product type, filling weight, preferred pouch style, and expected quantity — we'll take it from there.
The Bottom Line
The right pet food packaging protects your product, works with your filling process, and fits your budget. You don't always need the most expensive material or the most complex bag structure — you need the one that matches your actual product.
We manufacture custom printed pet food bags and rollstock films in multiple laminated materials, dimensions, and pouch structures. If you're developing new packaging or comparing suppliers, contact our team at sales@guoshengpacking.com with your product details — we'll review your requirements and recommend the right options.
References
